eClinical Products and Services

  1. Test of Homepage Bucket HTML In Product Document Type 3/23/2023

    Test of Homepage Bucket HTML In Product Document TypeTest of Homepage Bucket HTML In Product Document Type. Test of Homepage Bucket HTML In Product Document Type. Test of Homepage Bucket HTML In Product Document Type Test of Homepage Bucket HTML In Product Document Type.

    Test of Homepage Bucket HTML In Product Document Type Test of Homepage Bucket HTML In Product Document Type.

  2. An Intuitive Controller For All Bioprocess Research And Development Applications 8/15/2023

    Livit Flex- The next generation in bioprocess control

    The Livit Flex is the intuitive controller that fits any research and development application. It can be configured as a single or dual control system for single-use and / or multi-use bioreactors. Only one network is needed to monitor and control the data of all your bioprocesses.

  3. 0.2 - 8 GHz Solid State Programmable Attenuator: 50P-2111 1/21/2021

    JFW’s 50P-2111 is a 50 Ohm solid-state programmable attenuator with attenuation range 0 to 95 dB by 1dB steps.  The unit operates bi-directionally over the frequency range 200 MHz to 8 GHz.  The unit is labeled “input” and “output” because the RF power rating is different for each port.  The input port is rated for +24 dBm.  The output port is rated for +15 dBm.  It is available with SMA female RF connectors.

  4. Micro Molding Services 12/18/2023

    Once an exact mold is built, our robust micro molding process begins. Dependable and accurate equipment is essential when working with such small component sizes and micro features.

  5. Pharmaceutical Process Equipment Isolators: Powders And Aseptic 2/8/2021

    In pharmaceutical manufacturing containment performance is critical to minimize operator exposure and process cross contamination.

  6. Dual Chamber Pharmaceutical Filling Systems 5/14/2021

    Traditional vials, ampoules, and cartridges are still the most popular delivery systems and the prefilled syringes are still experiencing the greatest growth in the market of any parenteral dosage form. Therefore, to advance the development program appropriately, pharmaceutical R&D scientists should effectively leverage the advantages offered by each form of packaging and dosage.

  7. SpectraMax M Series Microplate Readers 6/15/2023

    Configurable readers with triple-mode cuvette ports, validation tools, and compliance software.

    The SpectraMax® M Series Multi-Mode Microplate Readers measure UV and visible absorbance, fluorescence, luminescence, fluorescence polarization, TRF and HTRF.

  8. ally: Beyond The Meter 1/18/2023

    The ally smart water solution goes beyond the meter to help you measure smarter, communicate better, analyze easier and improve revenue and efficiency.

  9. Pharmatec Fermentation Systems 1/18/2022

    Pharmatec Fermentation Systems and Fermentation Units are designed for the production of complex solutions with multiple process steps (cascade, fermentation or dialysis fermentation). Preparation is carried out in temperature-controlled stainless steel tanks with stirring units under addition of chemicals and/or nutrient solutions. The following process steps are used: fumigation (N2, O2 and sterile air), dosage (substrate and anti-foam), concentration (base and acid). All valid pharmaceutical (e. g. USP, EP) and technical rules and standards (e. g. DIN, ASME, GMP and FDA / ISPE Guidelines) are followed and applied.

  10. Automotive PDoA UWB Transceiver: DW3300Q 5/17/2024

    The DW3300Q is a fully integrated single chip Ultra-Wideband (UWB) low-power low-cost transceiver IC compliant to IEEE Std 802.15.4™‐2020 and IEEE Std 802.15.4z™‐2020 for automotive applications.